DIY

DIY: How to Make Your Own Rose Gold Metal Apple Watch Band at Home

Rose gold metal Apple watch bands are one of the most sought-after Apple watch bands on the market. This is because they are unique, stylish, attractive, and blend well with virtually any outfit. But finding a rose gold metal Apple watch band on the market is quite difficult and those available are quite pricey. But you know that you can make your own rose gold metal apple watch in the comfort of your home? In this article, we will give you step by step process on how to make your own rose gold metal apple watch band at home.

Make Your Own Rose Gold Metal Apple Watch Band

Required materials

  • A Rose gold plating solution
  • A metal band link bracelet kit
  • A small sponge or brush
  • A polishing cloth
  • A plastic container

Step-by-step process

Step 1: Assemble the metal band link

The first step of making your own rose gold metal Apple watch band at home is assembling the metal band link that you purchased online or at your local store. This process is easy and straightforward. All you need to do is follow the instructions provided by the manufacturer to the letter. Ensure that all metal links are connected correctly according to the instructions given.

Step 2: Add rose gold plating solution

Once you are done assembling the metal band link, the next step is to add a rose gold plating solution to the band. To do this, add rose gold plating solution on a small plastic container then gently place your metal band link on the solution. Use a sponge or small brush to gently brush the metal band while soaked in the solution to ensure an even coating. Also, ensure that you work in a well-ventilated area.

Step 3: Give it at least 30 minutes

Let your metal band stay in the solution for at least 30 minutes to ensure that all corners are well and evenly coated. After 30 minutes, your metal band will have a Rose gold coating. Remove it gently from the plating solution then rinse it thoroughly with running water.

Step 4: Polish the band

Once you are done cleaning your rose gold metal band, polish it using a polishing cloth. This process will help to get rid of excess plating solution. It will also give it a bright shiny look that will leave everyone staring at your wrist. However, when polishing, avoid areas with connectors.

Step 5: Attach the band to your apple watch

After polishing your rose gold metal band, the final step is attaching it to your apple watch. Again, this process is simple, just attach your apple watch to the connectors on the band. That’s it, you can now enjoy your brand new rose gold metal band.

Final thoughts

Making your own rose gold metal apple watch band at home is a simple and straightforward process. All you need is the right materials that can be bought at your local store, then follow the simple steps given above.

DIY: Create Your Own Custom Apple Watch Bands

The watch bands which are branded Apple can cost you a lot of money. Coming up are some tips on creating your own Custom Apple Watch Bands, which are more stylish and save your money.

In the watch markets, you will find many attractive apple watches. The challenge always comes when you realize that some of them have just the logo branded but are not original ones. You should be careful when buying them because some may be fake.

That should not worry you because I got a simple way that is not difficult to master. Apple-branded watches are not that difficult to make as all you need is the lugs and a shelf band. We will discuss the tools and equipment required to make watchbands, how you will bring them together, and other methods you can apply when making them.

Create Your Own Custom Apple Watch Bands

Materials you will Use

Apple band watches consist of; lugs and old bands of watches.

We can start by narrowing down the lugs. These lugs come in different varieties. They all differ in colors as some are black while others can have a black color. Some lugs are simple and precisely resemble those of Apple’s watches, while others look like ancient times. Tools can fix not all lugs, some require fingernails, and you are good to go.

The watch bands also come when their sizes differ from each other. Some of them may be angled, and the rest tamper. It will make work easy for you when you choose the flat ones. The flat ones have a small hole in which the lug is fixed. Also, the size of the watch bands goes hand in hand with the size of the lugs. You should always measure their dimensions to ensure that they are of the same size.

You can always measure to know the size of both the lugs and the band. Although, for the lugs, their sizes are permanently marked for easy identification without measuring. After identifying the types and sizes of both lugs and the shelf bands you will require, it will not be difficult to assemble them and create your own Custom Apple Watch bands.

How to put them together

Finally, you can choose the sizes that suit you the most. Let us see how you will put them together.

For the rough lugs, no need to apply any tool. You have to possess a pin that will be inserted in the hole on the bottom side. Then you interject the lug onto the opposite side of the pin. Then press the pin downwards to be on the opposite side of the lug.

You should have a screwdriver to loosen and tighten the screws of the lugs. Use the driver to open the screws and slide the band through the small space. After that, you can tighten it back to hold on to the band tightly.

Making the lugs together with bands on your own will not limit you to the styles that you are interested in personally. It will allow you to try different styles and colors that maybe you cannot find in Apple’s brand shops and markets.

Bath shower mixer installation guide

If you will be installing new pipes, you will need to do this first, and if you are inexperienced, it is recommended that you consult a professional plumber. If you plan to keep costs and labor down and take advantage of existing plumbing work, you can install a new shower mixer yourself.

Once filled with water, your shower mixer will be quite heavy, so make sure your floors can support this weight in the first step. Check with a professional if you’re unsure as this is important.

Bath shower mixer installation guide

1. The first step is to prepare the shower mixer. You will likely have a support frame that needs to be installed before installing the shower mixer in the bathroom – turning the shower mixer upside down will make this step easier. Make sure you install the structure according to the manufacturer’s instructions and align the legs correctly: when the bathroom shower mixer is in the right position, the legs will adjust to provide good support for the shower mixer despite any uneven floors in the shower bathroom.

Mixers will be tricky to install once the bathroom shower mixer is in place, so you should go ahead with that. A bathroom shower mixer is likely designed to have a built-in drain and drain. The mixers are positioned above a rubber gasket that ensures water-tightness between the mixers and the shower mixer in the bathroom; Then it is fixed from below. Use a small amount of silicone to seal around the overflow and drain. Mixers will be connected to your water pipe using pieces of flexible tubing.

2. At this point, it is necessary to adjust the legs to make small adjustments so that the shower mixer in the bathroom is level. Use a spirit level to check – don’t rely on your naked eye. It is recommended to place your feet on the boards to distribute the weight over the larger bathroom shower stall floor area as the bathroom shower mixer will be very heavy when full of water. Then it’s time to close the edge of the shower mixer. First make sure your bathroom shower mixer and adjacent wall are clean and free of dirt and grease, lubricate the joint with hygienic sealant, then dip your finger in the soapy water and run it over the fresh sealant. This will ensure that the sealant is smooth and that there are no gaps at the edges.

3. The shower hose will come out of your mixer and you will need to install a lift rail on the wall to support the showerhead. The bar allows you to raise and lower the showerhead so that both tall and short family members can comfortably fit in the shower area: make sure the bar is set at a height that will allow it to perform this function correctly.

4. You will also need to attach a shower screen level to the outside edge of your shower mixer to protect your bathroom shower head from shower mist while you shower. Measure carefully to make sure the screen will be flush with the edge of the bathroom shower mixer, preventing water from seeping over the edge onto the floor.

Conclusion

Finally, remember that these are just general tips: you should always follow the specific installation instructions provided by the manufacturer of your shower mixer. That why roxiedaisy.com the best in selling shower mixers that have installation manual.

DIY Your Own Bathroom Design Style

A good shower is essential to your physical and mental health. Choosing a perfect mitigeur colonne de douche for your DIY project is crucial. You should get a shower that works as you expect and performs satisfactorily. When buying your shower faucet, there are many factors to consider, including the styles, finishes, and materials. This article is dedicated to helping you choose the right shower faucet for your bathroom.

Factors to Consider When Choosing a Shower Faucet

1. Shower Faucet Configuration and Type

The main faucet configuration is a solo shower head and an all-in-one combination with both the bathtub faucet and shower tap.

There are five categories of shower taps available in the market, and they include:

• Rain showers

This type of shower is large and flat. They spray water straight down, and thus they are usually suspended directly above the user.

• Single-head spray shower

Single-head spray showers have about four individual nozzles that help distribute water as the user takes a shower. These individual nozzles are adjustable, and they adjust by using a small lever that alters the water flow pattern.

• Hand-held shower heads

A hand-held shower has a single head sprayer that is connected to a flexible pipe. This shower is very helpful and perfect when cleaning the hair and other areas which are hard to reach. It’s also best for people with limited mobility and those that will need to sit when taking a shower.

• Body spray shower faucets

A body spray shower faucet has multiple spray heads, which are usually integrated into the shower wall. The heads are either flat or compact nozzles.

• Multiple showerheads

The multiple or dual shower heads have more than one showerhead, and they’re controlled by a single set of levels wall-mounted. A diverter valve allows one to use one of the showerheads or both simultaneously.

DIY Bathroom Design Style

2. Check the Water Pressure

Determining your home’s water pressure is crucial before buying the faucet. The water pressure for most shower faucets ranges between 40 and 60 pounds per square inch (psi). Testers are available in most hardware stores which you can insert onto the shower arm, and they’ll help determine the water pressure of your home.

You should consider other important factors, including old pipes, clogs, and leaks since they can cause low water pressure.

3. Consider Accessories

When buying your shower faucet, you should consider getting several accessories which include:

• Head showers

A head shower helps make cleaning the bathtub easier. Thus, you’ll need to install a hand shower on your wall.

• Diverters

Diverters are used to move the water to the showerhead from the spout, and they’re usually located are the showerhead. You have to pull the diverter upward to activate the showerhead.

• Pressure-balancing valves

These valves are used to maintain the current water temperature when the water pressure drops suddenly.

• Anti-scald valves

This valve helps protect from extreme water temperatures.

4. Find Something in Your Budget

Finding a shower faucet within your budget is important in successfully completing your bathroom DIY. There are many faucets available, and the prices vary greatly as well depending on the size, model, and material. You should get a shower head that is within your budget.

5. Choose the Right Type of Valve

Thermostatic shower valve and pressure balance valve are the main types available; the thermostatic valve has two handles where one controls the water quantity and the other controls the water temperature.

This enables one to change water flow while maintaining temperature, which is essential for children and the elderly using the bathroom. The pressure balance valve one control that balances the water pressure and volume.

6. Bathroom Layout

The bathroom layout is essential when purchasing a shower faucet. You should measure the bathroom space to get a shower head that fits the size and shape of your bathroom.

Determining your bathroom style is important since it’s the busiest room in your home, especially during rush hours. You should ensure the shower faucet fits your bathroom seamlessly to meet the function. The good thing is that there are many styles and finishes available, so you’ll easily get one that meets your taste.

Summary

When doing a DIY for your bathroom, you’ll need to consider the shower faucet keenly. Bathroom layout, your budget, valve, type of shower head, and configuration are important factors to consider when buying a shower faucet.

DIY Apple Watch Band

The apple watch bands are quite expensive. This guide will direct you on how to construct your watch and thus get to save money. Besides, there are different styles from where you may make your selection from. Out there, you will come through different kinds of unique Apple watch bands. However, the main problem is that these products are not present for use by the Apple watch. Their markings are down purely since they are claiming that they are specific for use by Apple Watch. This review will give you adequate information on all you ought to learn about the use of the DIY Apple Watch Bands you will see in cxsbands . The items that you should ensure you have before you start using an Apple watch band include:

 

  • Strap Apple watch connectors
  • Elastic with your desired size
  • Fabric
  • Thread Sewing machine

 

  1. Cut the fabric. If you want a scrunchie with a medium-size, ensure you have a fabric with a length of 18 inches and a height of four inches.
  2. When you cut out the fabric, get to fold it and put the right sides in place. In this case, you will get to sew in the edges and thus form a long tube. Thus, there is a need to turn the fabric by ensuring the right side is out.
  3. Hold the elastic. The elastic need to have a similar size as the wrist measurements. You ought to put the safety pin on the elastic side. Also, use a straight pin or a safety pin that acts as an attachment on the sides of the tube end.
  4. The rest of the elastic parts are fed through the pin and tube in the tube end.
  5. Pick the band watch connector and get to feed it to the sides.
  6. When the procedure is done on the other ends, you will finish the process.

DIY Apple Watch Band

 

Put Them Together

 When you pick the band and lugs, you will be ready for the assembly process. As you use the lugs with a rugged style, you do not require to use tools. Thus, get to insert the pogo pin in the watchband end. One of the ends of the pin is put in the lug inside as you press the other side while inserting in the lug’s inner side. Though the process is quite knacky, it is much easier for one to engage in the process with the help of fingernails. Also, there are flat head mini screwdrivers and watch tool that helps a lot.

 

Comes in Many Options

Ensure you come up with a way that you will put the band in place. In this process, you will realize there are different kinds of options that are at your disposal. This implies the watch will get the chance of representing a given style without any kind of limits from the steep markups and Apple Watch market. Another thing, the silicone Barton strap comes in a two-tone and subtle design accompanied by a locking system. This way, it can avoid it from loosening up as you engage in different workouts. The strap ends get tapered down to fit perfectly in the wrist curvature. Thus, it will be more comfortable compared to all the other kinds of silicone Apple Watch bands.

 

Change and Remove of Bands

Ensure you press the band release button present on the Apple Watch. Also, ensure you slide the watchband across and later on remove it. When this process is done, you will slide your new band in with minimal effort. At all times, ensure there is no time in which you will get to force your brand into a slot. In case you face challenges in insertion or removal of the band, consider pressing the release button once more.

 

Band Fastening

When you wish to have optimal performance, ensure the Apple Watch gets to fit in the right manner on the wrist. If you wish to acquire great results, the Apple Watch back requires skin contact with great features. These features consist of a heart rate sensor, haptic notifications, and a wrist detection product. You should always wear a watch band with the right fit. In this case, you ought to ensure the band is not too loose or too tight. Thus, our room will have extra space to help you breathe in the right manner. You will have a lot of comfort and the sensors will perform the job with minimal effort. Additionally, the sensor will work best after one wears an Apple Watch on the wrist top.

 

Conclusion

You can now comfortably make a DIY Apple Watch Band. Follow these instructions well and you will be delighted with the result. Thus, you will be certain of high quality and long-lasting band.

DIY Maternity Jeans

My growing belly has been a source of contention when it comes to finding comfortable pants…I have been using the rubber band method but I was constantly tugging to pull my jeans up & always tugging my shirts down, to make sure that the un-zipped zipper was hidden. I tried the belly bands but was never a huge fan, it just added one more thing for me to tug on. SO, as to not delay the inevitable anymore I decided to just sew myself a quick pair of maternity jeans to see if they were any more comfortable (they are!! hooray!).

There are tons of similar diy’s on the web but I thought I would share how I did mine as well. They were super simple & didn’t take me long at all. Here’s how I did it:

I just used one of the belly bands I had gotten from Target (because I knew I wouldn’t use it by itself again) & a pair of stretchy jeans, also from Target, that I didn’t mind cutting up.

DIY Maternity Jeans

DIY Maternity Jeans

I removed the zipper & sewed down the fly. Then, I cut around the waistband – a little deeper in the front to leave room for the belly & then put right sides together of the band & jeans, pinned a few spots to hold it in place & then sewed them together. This part was a little tricky because of the stretch in the band, I just pulled both sides taut as the machine feed through.

DIY Maternity Jeans

Flip the band up & voila! I think they turned out great!! They are super comfortable. The band can be pulled all the way up (will be perfect when my bump gets even bigger) or it can be folded over for a half band. Definitely worth the effort & SOOOO much more affordable than any of the maternity jeans I have seen in the stores!

DIY Maternity Jeans

You can’t even tell the difference when your shirt is pulled down! I plan on finding a cheap darker wash & using an old stretchy tank top to make another pair. They kind of feel like wearing pajamas & I just can’t argue with that!!

DIY Maternity Jeans

handmade halloween

This year I decided to make my costume. Most of the time, I wait until the last minute & my costume consists of just throwing things together. This year I wanted to really get in there & sew/make it. So in my free time this week, I’ve been busy working on my costume! You can probably guess what I am going to be from the progress photos but I can’t wait to share the finished product!!!

handmade halloween

It’s really been such a fun process! I’m currently waiting for my paper mache mask to dry so I can paint it & then I will be all done! I’ll be sure to take lots of photos to share!

I’d love to hear what everyone else’s costume is going to be, so please share! We are going to a costume party on Saturday night, I’m so excited! hugs & cheek pecks, Meghan

cheap & easy bedroom wall art

bedroom-diy

My bedroom walls were looking a little plain & sad so I decided to make some simple pieces to bring in some fun & color to our bedroom this past weekend. My first instinct would be to paint the walls but because we are renting I have to think of other ways to brighten up the boring tannish walls. I am on a pretty non-existent decorating budget so here are some simple, inexpensive ideas to jazz up your walls.

bedroom-diy

bedroom-diy

1. Fabric Fringe Garland – I posted this fringe garland diy (by Prudent Baby) on my recent Fringe Frenzy post. It is a super simple no-sew diy. I chose 4 cotton solid fabrics from Hobby Lobby & got 1 yard of each (I think they were only a couple of dollars per yard). I cut my fabric 18 x 22 inches to get exactly 4 tassels from each yard.

bedroom-diy

2. Framed Photo Booth Photos – I cheated & used the IncrediBooth iphone app to take these photobooth strips (real photobooth photos would be even better!). I printed them out on my home printer & cut them out. I attached them with double stick tape to a white mat board & used an 8 x 10 frame I had on hand to display them. I love that it will be easy to change them out with new photo strips as time goes on.

bedroom-diy

3. & 4. Hanging Camera & Print – It’s no surprise that I use my large camera collection to add fun & dimension to a few rooms in my house. (ex. my vintage camera display & my other camera display) I love the size of the mini Diana & it’s one of my favorite cameras to shoot film with. I used my toy camera strap diy to make this yellow braided strap & I thought the colors fit perfectly with my new bedroom decor. The Polaroid Print by Handz was a birthday gift from my sweet brother & sister-in-law & I used a .99 cent Pants Hanger from Ikea to hang it. (much cheaper than a frame & just as pretty)

bedroom-diy

5. Written Word Wall Canvas – I bought this blank canvas from the craft store (for 50% off) awhile back with a few different projects in mind. I originally saw this idea on pinterest & thought it would be perfect for this grouping. I used a black paint pen that I had in my craft supplies. I chose some of the lyrics from the song “More Than Words” by Extreme, we danced to this song at our wedding & now it serves as a permanent reminder over our bed that actions mean so much more than words. Showing we love each other is just as important as saying it.

bedroom-diy

6. Painted Letters – Ridiculously simple – I just got the cardboard letters from the craft store & painted them with blue acrylic paint. I cut out a small hole in the back to attach them to the wall with a push pin.

bedroom-diy

7. Metal Photo Clips – I had these small metal clips on hand, found in an office supply store or the office section of Target. I hung them on a small nail. I love changing out photos & little notes so I thought these would be perfect! The photos were taken with the Hipstamatic app & printed out on our home printer.

bedroom-diy

Voila!! Simple & inexpensive wall decor! It’s made such a difference to our bedroom & we are loving it! hugs & cheek pecks, Meghan

Chevron Stripe Fridge DIY

chevron-fridge-diy

You may remember my striped wall from our old house. Ohhhhh, how I loved those stripes! Well now that we are renting & unable to paint the walls, I wanted to incorporate some stripes into our new house & I did so by adding a little pizzaz to our boring black refrigerator! The kitchen is the first room you see when you walk in our apartment, so this adds a fun focal point when you first walk in the door! I love how it turned out! It’s so simple, very inexpensive & easily removed, here is how I did it:

chevron-fridge-diy

chevron-fridge-diy

chevron-fridge-diy

 

Supplies::

White Contact paper – I got mine at Target in the drawer liner section for a few bucks
Measuring tape & T square ruler
Scissors or X-acto knife

 

Instructions::

1. I measured the width of our fridge & included extra for the sides of the doors so I could wrap the stripes around.
2. I cut five pieces of contact paper to the desired width.
3. I decided I wanted 3 big peaks on the front so I drew a grid pattern with my t-square by dividing the contact paper into 6 squares across & 3 down. I connected the points of intersection to create the zig zag pattern.
4. I lined all 5 sheets of contact paper together & taped them down to the table so I could cut out all 5 at the same time. (I only ended up using 5 stripes for the fridge, this will make 10, I wanted extras just in case.)
5. I carefully cut out the chevron stripes with my straight edge & x-acto knife.

chevron-fridge-diy

chevron-fridge-diy

6. Once they were all cut out, I placed a marker on the mid-point of the front of our fridge & very gently applied each stripe.

& that’s it!! Super easy, cheap & fun!!

chevron-fridge-diy

chevron-fridge-diy

I love how much big character it adds to my little kitchen & it’s perfect for renters because the contact paper easily peels off & leaves no residue!! I would love to see photos if you try this too! Let me know if you have any questions. xoxo. meghan

slightly obsessed…vintage fans

I have a small (but growing) collection of vintage electric fans. I actually use mine to fill the space above my cabinets in my kitchen. I would love to have a whole cluttered collection of them up there so I am always on the look out for them. Here are some photos of my tiny collection so far…the “little giant” is my favorite!

vintage-fan-collection-group

vintage-fan-collection-group

 

Flea markets & thrift stores are always a good place to look for them, although now-a-days they usually get picked up pretty quickly. Etsy has a nice selection of them, here are some from Etsy’s vintage section to get you obsessed as well…(I would gladly add any/all of these to my collection!)

vintage-fan-collection-group

from left to right
1. vintage dominion | shop: 22 bay road
2. 1950’s westinghouse | shop: vetera
3. vintage zero | shop: sugarlilly vintage
4. vintage aquamarine table fan | shop: rubies are forever
5. vintage 1950’s fan | shop: artyfatz
6. vintage freshn’d aire | shop: all the best vintage
7. westinghouse large fan | shop: jersey ice cream co.
8. vintage tickle me pink fan | rubies are forever

here are some other things I am slightly obsessed with…vintage alarm clocks, polaroid cameras & heather grey! Happy Thursday! I love how holidays on a Monday always make the week go by so fast! ♥

Save